|
HS Code |
654953 |
| Chemical Name | Polyethylene Glycol O-Phenylphenyl Ether Acrylate |
| Cas Number | 55850-51-4 |
| Molecular Formula | Varies with PEG chain length |
| Appearance | Clear to slightly yellowish liquid |
| Odor | Mild, characteristic |
| Molecular Weight | Depends on PEG chain length (typically 300-700 g/mol) |
| Boiling Point | Decomposes before boiling |
| Density | Approximately 1.1-1.2 g/cm3 at 25°C |
| Solubility In Water | Slight to moderate solubility |
| Viscosity | Moderate to high, depending on PEG chain length |
| Refractive Index | About 1.48-1.52 at 20°C |
| Flash Point | > 100°C (closed cup) |
| Storage Temperature | Store between 2-8°C, away from light |
| Functional Groups | Acrylate, ether, aromatic ring, polyether |
As an accredited Polyethylene Glycol O-Phenylphenyl Ether Acrylate factory, we enforce strict quality protocols—every batch undergoes rigorous testing to ensure consistent efficacy and safety standards.
| Packing | 1 kg amber glass bottle, tightly sealed, with tamper-evident cap. Labeled with product name, concentration, and hazard warnings. |
| Container Loading (20′ FCL) | Container Loading (20′ FCL): 18 metric tons (MT) packed in 200 kg HDPE drums; 90 drums per 20-foot full container load (FCL). |
| Shipping | **Polyethylene Glycol O-Phenylphenyl Ether Acrylate** should be shipped in tightly sealed, chemical-resistant containers, protected from light, moisture, and incompatible substances. The shipment must comply with local, national, and international regulations, including labeling requirements. Avoid extreme temperatures and mechanical shock during transit. Ensure transport with appropriate safety documentation and Material Safety Data Sheet (MSDS). |
| Storage | Polyethylene Glycol O-Phenylphenyl Ether Acrylate should be stored in a tightly closed container, in a cool, dry, and well-ventilated area away from sources of heat, ignition, and direct sunlight. Protect from moisture and incompatible substances such as strong acids and oxidizing agents. Recommended storage temperature is typically below 25°C (77°F). Always follow manufacturer’s and safety data sheet (SDS) guidelines for safe handling and storage. |
| Shelf Life | Polyethylene Glycol O-Phenylphenyl Ether Acrylate typically has a shelf life of 12 months when stored in a cool, dry place. |
|
Purity 98%: Polyethylene Glycol O-Phenylphenyl Ether Acrylate with 98% purity is used in UV-cured coatings, where it ensures high transparency and minimal impurities for optical clarity. Molecular Weight 800 Da: Polyethylene Glycol O-Phenylphenyl Ether Acrylate with molecular weight 800 Da is used in inkjet printing formulations, where it improves dispersion stability and jetting performance. Viscosity Grade Low: Polyethylene Glycol O-Phenylphenyl Ether Acrylate of low viscosity grade is used in photo-polymer resins, where it facilitates rapid and homogeneous mixing for uniform polymer matrix formation. Melting Point 45°C: Polyethylene Glycol O-Phenylphenyl Ether Acrylate with melting point 45°C is used in hot-melt adhesive systems, where it enhances processability and temperature responsiveness. Particle Size <5 μm: Polyethylene Glycol O-Phenylphenyl Ether Acrylate with particle size less than 5 μm is used in specialty pigment dispersions, where it delivers superior dispersion and consistent surface finish. Stability Temperature 120°C: Polyethylene Glycol O-Phenylphenyl Ether Acrylate with stability temperature up to 120°C is used in thermally cured composite materials, where it ensures structural integrity during high-temperature processing. Refractive Index 1.51: Polyethylene Glycol O-Phenylphenyl Ether Acrylate with refractive index 1.51 is used in optical waveguide manufacturing, where it optimizes light transmission and signal performance. Water Solubility High: Polyethylene Glycol O-Phenylphenyl Ether Acrylate with high water solubility is used in water-based coating formulations, where it allows easy blending and uniform application. Photoinitiator Compatibility: Polyethylene Glycol O-Phenylphenyl Ether Acrylate with broad photoinitiator compatibility is used in 3D printing resins, where it enhances cure speed and resolution. |
Competitive Polyethylene Glycol O-Phenylphenyl Ether Acrylate prices that fit your budget—flexible terms and customized quotes for every order.
For samples, pricing, or more information, please contact us at +8615651039172 or mail to sales9@bouling-chem.com.
We will respond to you as soon as possible.
Tel: +8615651039172
Email: sales9@bouling-chem.com
Flexible payment, competitive price, premium service - Inquire now!
