|
HS Code |
462035 |
| Productname | Alkyd Impregnating Insulating Varnish C30-11 |
| Type | Alkyd resin-based varnish |
| Appearance | Clear to light yellow liquid |
| Viscosity 25c | 40-70 s (4 mm Ford cup) |
| Density 20c | 0.92-0.98 g/cm3 |
| Dryingtime Touch | 2-4 hours at 25°C |
| Dryingtime Complete | 24 hours at 25°C |
| Breakdownvoltage | ≥35 kV/2mm |
| Solidscontent | 45-55% |
| Flashpoint | ≥30°C |
| Recommendedapplication | Electrical insulation of rotors, stators, and coils |
| Shelflife | 12 months in sealed container |
| Storagetemperature | 5-25°C |
| Thinner | White spirit or turpentine |
| Adhesion | Strong adhesion to metal and copper |
As an accredited Alkyd Impregnating Insulating Varnish C30-11 factory, we enforce strict quality protocols—every batch undergoes rigorous testing to ensure consistent efficacy and safety standards.
| Packing | The `Alkyd Impregnating Insulating Varnish C30-11` is packaged in a 20-liter metal drum with a secure, sealed lid. |
| Container Loading (20′ FCL) | Container Loading (20′ FCL) for Alkyd Impregnating Insulating Varnish C30-11: typically loaded in 200L drums, 80 drums per container. |
| Shipping | Alkyd Impregnating Insulating Varnish C30-11 is shipped in tightly sealed, chemical-resistant containers to prevent leakage or contamination. The containers should be stored upright and protected from heat, moisture, and direct sunlight. Handle with care, complying with local hazardous materials regulations and safety guidelines for flammable or volatile substances. |
| Storage | Alkyd Impregnating Insulating Varnish C30-11 should be stored in tightly sealed containers, in a cool, dry, and well-ventilated area away from heat, open flames, and direct sunlight. Avoid exposure to moisture and incompatible substances. Storage temperature should ideally be between 5°C and 25°C. Keep containers upright and labeled, away from food and drinking water. Handle with care to prevent spillage. |
| Shelf Life | Shelf life of Alkyd Impregnating Insulating Varnish C30-11 is typically 12 months in unopened containers under recommended storage conditions. |
|
Dielectric Strength: Alkyd Impregnating Insulating Varnish C30-11 with high dielectric strength is used in electric motor windings, where it ensures superior insulation and minimizes electrical breakdown. Viscosity Grade: Alkyd Impregnating Insulating Varnish C30-11 of low-viscosity grade is used in transformer coil impregnation, where it provides deep penetration and uniform coverage. Thermal Stability: Alkyd Impregnating Insulating Varnish C30-11 with a thermal stability up to 155°C is used in generator stators, where it maintains insulation integrity under continuous high-temperature operation. Curing Time: Alkyd Impregnating Insulating Varnish C30-11 featuring a short curing time is used in automated coil production lines, where it increases process efficiency and throughput. Moisture Resistance: Alkyd Impregnating Insulating Varnish C30-11 with enhanced moisture resistance is used in outdoor electrical components, where it prevents insulation degradation in humid environments. Solids Content: Alkyd Impregnating Insulating Varnish C30-11 with 50% solids content is used in relay and switch assembly, where it achieves reliable film build and mechanical protection. Adhesion: Alkyd Impregnating Insulating Varnish C30-11 with strong adhesion is used on laminated core assemblies, where it ensures long-lasting bond strength and vibration resistance. Flash Point: Alkyd Impregnating Insulating Varnish C30-11 with a high flash point is used in high-voltage equipment, where it improves operational safety during application and service. Film Hardness: Alkyd Impregnating Insulating Varnish C30-11 with hard-film formation is used in printed circuit boards, where it provides abrasion resistance and protects conductive pathways. UV Resistance: Alkyd Impregnating Insulating Varnish C30-11 with UV resistance is used in solar inverter panels, where it prevents insulation deterioration from sunlight exposure. |
Competitive Alkyd Impregnating Insulating Varnish C30-11 prices that fit your budget—flexible terms and customized quotes for every order.
For samples, pricing, or more information, please contact us at +8615651039172 or mail to sales9@bouling-chem.com.
We will respond to you as soon as possible.
Tel: +8615651039172
Email: sales9@bouling-chem.com
Flexible payment, competitive price, premium service - Inquire now!
