|
HS Code |
262158 |
| Product Name | Chlorinated Polyvinyl Chloride Oil-Resistant Varnish G50-3 |
| Type | Varnish |
| Main Component | Chlorinated Polyvinyl Chloride |
| Oil Resistance | High |
| Solids Content Percent | Approximately 30% |
| Appearance | Transparent or slightly yellow liquid |
| Drying Time Surface | Less than 2 hours at 20°C |
| Drying Time Hard | Less than 24 hours at 20°C |
| Viscosity | 40-60 seconds (Ford cup #4, 23°C) |
| Application Method | Brushing, spraying, dipping |
| Adhesion Strength | Good adhesion to metals and cable insulation |
| Dielectric Strength | Above 35 kV/mm |
| Flexibility | Retains flexibility after curing |
| Recommended Thinner | Aromatic hydrocarbon solvents |
| Storage Life | 12 months in sealed containers at room temperature |
As an accredited Chlorinated Polyvinyl Chloride Oil-Resistant Varnish G50-3 factory, we enforce strict quality protocols—every batch undergoes rigorous testing to ensure consistent efficacy and safety standards.
| Packing | Chlorinated Polyvinyl Chloride Oil-Resistant Varnish G50-3 is packaged in 20-liter metal drums with secure, airtight lids. |
| Container Loading (20′ FCL) | Container Loading (20′ FCL): 16,000 kg of Chlorinated Polyvinyl Chloride Oil-Resistant Varnish G50-3 packed in 200 kg steel drums. |
| Shipping | **Chlorinated Polyvinyl Chloride Oil-Resistant Varnish G50-3** is shipped in tightly sealed, corrosion-resistant containers to prevent leaks and contamination. Packages are labeled according to hazardous materials regulations and must be stored upright, away from direct sunlight, heat, and ignition sources during transit to ensure safety and product integrity. |
| Storage | Chlorinated Polyvinyl Chloride Oil-Resistant Varnish G50-3 should be stored in tightly sealed containers, away from direct sunlight, heat sources, and ignition points. Store in a cool, well-ventilated area with temperatures between 5–35°C. Keep away from incompatible substances such as strong oxidizers and acids. Avoid moisture and always handle with appropriate personal protective equipment to ensure safety and material integrity. |
| Shelf Life | Shelf life of Chlorinated Polyvinyl Chloride Oil-Resistant Varnish G50-3 is typically 12 months in tightly sealed, original containers. |
|
Viscosity grade: Chlorinated Polyvinyl Chloride Oil-Resistant Varnish G50-3 with a viscosity grade of 30-50 mPa·s is used in electrical motor windings, where it provides uniform coating and enhanced dielectric strength. Oil-resistance: Chlorinated Polyvinyl Chloride Oil-Resistant Varnish G50-3 with oil-resistance rating SAE 30 is used on machinery parts surfaces, where it prevents oil permeation and extends service life. Solids content: Chlorinated Polyvinyl Chloride Oil-Resistant Varnish G50-3 with solids content 55% is used for marine cable insulation, where it achieves thick film formation and superior waterproofing. Thermal stability: Chlorinated Polyvinyl Chloride Oil-Resistant Varnish G50-3 with thermal stability up to 130°C is used in automotive wiring coats, where it maintains insulation integrity under heat cycling. Adhesion strength: Chlorinated Polyvinyl Chloride Oil-Resistant Varnish G50-3 with adhesion strength ≥ 5 MPa is used on transformer coil assemblies, where it ensures long-term, reliable bonding of windings. Volatility: Chlorinated Polyvinyl Chloride Oil-Resistant Varnish G50-3 with low volatility (<2% loss at 120°C) is used in aerospace sensors, where it secures dimensional stability during operational stress. Particle size: Chlorinated Polyvinyl Chloride Oil-Resistant Varnish G50-3 with particle size <5 microns is used in precision electronic components, where it delivers a smooth, defect-free insulating layer. Purity: Chlorinated Polyvinyl Chloride Oil-Resistant Varnish G50-3 with purity ≥ 98% is used for circuit board protective coatings, where it guarantees minimal electrical leakage and maximum performance. Drying time: Chlorinated Polyvinyl Chloride Oil-Resistant Varnish G50-3 with a drying time of 30 minutes is used in industrial assembly lines, where it increases productivity through rapid processing cycles. Chlorine content: Chlorinated Polyvinyl Chloride Oil-Resistant Varnish G50-3 with chlorine content 65% is used on power cable sheaths, where it delivers excellent flame retardancy and oil resistance. |
Competitive Chlorinated Polyvinyl Chloride Oil-Resistant Varnish G50-3 prices that fit your budget—flexible terms and customized quotes for every order.
For samples, pricing, or more information, please contact us at +8615651039172 or mail to sales9@bouling-chem.com.
We will respond to you as soon as possible.
Tel: +8615651039172
Email: sales9@bouling-chem.com
Flexible payment, competitive price, premium service - Inquire now!
