PERGOPAK M6 Matting Agents

Purity 99%: PERGOPAK M6 Matting Agents with a purity of 99% is used in high-performance industrial coatings, where superior matting and gloss control are required.Particle Size 7µm: PERGOPAK M6 Matting Agents with a particle size of 7µm is used in architectural paints, where uniform matting and smooth surface appearance are achieved.Thermal Stability 200°C: PERGOPAK M6 Matting Agents with thermal stability up to 200°C is used in powder coatings, where consistent matting is retained after high-temperature curing.Oil Absorption 160 g/100g: PERGOPAK M6 Matting Agents with oil absorption value of 160 g/100g is used in alkyd resin systems, where enhanced dispersion and matting efficiency are observed.Bulk Density 0.08 g/cm³: PERGOPAK M6 Matting Agents with a bulk density of 0.08 g/cm³ is used in lightweight wood coatings, where excellent suspension stability and matte finish are provided.Melting Point 330°C: PERGOPAK M6 Matting Agents with a melting point of 330°C is used in heat-resistant coatings, where persistent matting performance at elevated application temperatures is essential.Viscosity Neutral: PERGOPAK M6 Matting Agents with viscosity neutral behavior is used in waterborne formulations, where minimal impact on viscosity and optimal film leveling are required.Whiteness Index >85: PERGOPAK M6 Matting Agents with a whiteness index greater than 85 is used in clear varnishes, where high clarity and matte optical properties are needed.Chemical Inertness: PERGOPAK M6 Matting Agents with high chemical inertness is used in reactive resin systems, where compatibility and long-term matte stability are critical.Refractive Index 1.54: PERGOPAK M6 Matting Agents with a refractive index of 1.54 is used in UV-curable coatings, where low haze and consistent matte appearance are delivered.