|
HS Code |
303913 |
| Product Name | Surface Additives |
| Form | liquid |
| Color | clear to slightly hazy |
| Odor | mild |
| Density | 0.95 g/cm3 |
| Ph | 6.5-8.0 |
| Flash Point | >100°C |
| Solubility In Water | dispersible |
| Boiling Point | >100°C |
| Viscosity | 50-200 mPa·s |
| Application | improves surface properties |
| Compatibility | suitable for water-based and solvent-based systems |
| Storage Temperature | 5-30°C |
| Shelf Life | 12 months |
| Voc Content | <1% |
| Chemical Class | polymeric |
As an accredited Surface Additives factory, we enforce strict quality protocols—every batch undergoes rigorous testing to ensure consistent efficacy and safety standards.
| Packing | The Surface Additives are packaged in a 25-kilogram blue plastic drum, clearly labeled with product name, safety information, and batch number. |
| Container Loading (20′ FCL) | Container loading for Surface Additives (20′ FCL): Typically loaded in 16-18 tons, packed in drums or IBCs, ensuring safe, secure transport. |
| Shipping | Surface Additives are shipped in tightly sealed containers, clearly labeled with hazard information. Transport follows local and international regulations for chemicals, ensuring protection from heat, moisture, and physical damage. Proper ventilation and spill containment measures are in place to prevent leaks or contamination during transit. Handle with care; avoid rough handling. |
| Storage | Surface additives should be stored in tightly sealed containers in a cool, dry, and well-ventilated area away from direct sunlight, heat sources, and incompatible substances. Keep containers clearly labeled and protected from physical damage. Ensure good ventilation to prevent vapor accumulation and store at temperatures recommended by the manufacturer. Follow all relevant safety guidelines and regulatory requirements for chemical storage. |
| Shelf Life | Surface additives typically have a shelf life of 12-24 months if stored in tightly sealed containers under cool, dry conditions. |
|
Viscosity grade: Surface Additives with low viscosity grade are used in automotive coatings, where improved flow and leveling are achieved. Purity 99%: Surface Additives with 99% purity are used in electronic device encapsulation, where electrical insulation and surface protection are enhanced. Particle size 0.5 µm: Surface Additives with 0.5 µm particle size are used in industrial adhesives, where uniform film formation and bonding strength are optimized. Thermal stability 250°C: Surface Additives with thermal stability up to 250°C are used in powder coatings, where thermal degradation is minimized. Molecular weight 20,000 Da: Surface Additives with molecular weight of 20,000 Da are used in architectural paints, where increased gloss and color intensity are obtained. Melting point 120°C: Surface Additives with a melting point of 120°C are used in printing inks, where rapid solidification and rub resistance are improved. Surface tension reduction 30 mN/m: Surface Additives with a surface tension reduction to 30 mN/m are used in waterborne formulations, where wetting and substrate coverage are significantly enhanced. Compatibilizer type: Surface Additives with compatibilizer properties are used in polymer blends, where phase separation is reduced. Hydrophobicity index 0.8: Surface Additives with a hydrophobicity index of 0.8 are used in protective coatings, where water repellency and surface durability are increased. pH stability range 4-10: Surface Additives with a pH stability range from 4 to 10 are used in cleaning agents, where performance consistency across varied conditions is ensured. |
Competitive Surface Additives prices that fit your budget—flexible terms and customized quotes for every order.
For samples, pricing, or more information, please contact us at +8615651039172 or mail to sales9@bouling-chem.com.
We will respond to you as soon as possible.
Tel: +8615651039172
Email: sales9@bouling-chem.com
Flexible payment, competitive price, premium service - Inquire now!
