|
HS Code |
570879 |
| Product Name | EPIKURE Curing Agent 3115-U-80 |
| Type | Epoxy Curing Agent |
| Appearance | Amber liquid |
| Chemical Type | Modified aliphatic amine |
| Weight Per Gallon | 8.1 lbs/gal |
| Viscosity 25c | 1600-2800 cP |
| Amine Value | 230-260 mg KOH/g |
| Active Hydrogen Equivalent Weight | 103 |
| Color Apha | 180 max |
| Mixing Ratio With Resin | Varies depending on resin |
| Recommended Use Level | As supplied |
| Density 25c | 0.97 g/cm3 |
| Flash Point | >93°C (200°F) |
| Solids Content | 80% (in nonylphenol) |
| Storage Temperature | 10-32°C (50-90°F) |
As an accredited EPIKURE Curing Agent 3115-U-80 Epoxy Curing Agent factory, we enforce strict quality protocols—every batch undergoes rigorous testing to ensure consistent efficacy and safety standards.
| Packing | The EPIKURE Curing Agent 3115-U-80 comes in a 5-gallon metal pail, labeled with product details and safety information. |
| Container Loading (20′ FCL) | Container loading (20′ FCL) for EPIKURE Curing Agent 3115-U-80: typically 16-20 pallets, about 12-16 metric tons per container. |
| Shipping | EPIKURE Curing Agent 3115-U-80 is typically shipped in tightly sealed containers to prevent moisture ingress, following all applicable transport regulations for chemical products. Containers should be clearly labeled and handled with appropriate personal protective equipment. Shipping must comply with relevant DOT, IMDG, and IATA guidelines for hazardous materials. |
| Storage | **EPIKURE Curing Agent 3115-U-80 Epoxy Curing Agent** should be stored in tightly closed containers in a cool, dry, and well-ventilated area away from direct sunlight, heat sources, and incompatible materials such as strong acids and oxidizers. Keep away from moisture and freezing conditions. Store at recommended temperatures to maintain product stability and prevent contamination or degradation. |
| Shelf Life | EPIKURE Curing Agent 3115-U-80 has a typical shelf life of 2 years when stored in unopened containers at recommended conditions. |
|
Viscosity: EPIKURE Curing Agent 3115-U-80 Epoxy Curing Agent with a viscosity of 700 mPa·s is used in industrial floor coatings, where it ensures smooth application and uniform film thickness. Amine Value: EPIKURE Curing Agent 3115-U-80 Epoxy Curing Agent with an amine value of 340 mg KOH/g is used in high-solids epoxy adhesives, where it provides rapid cure and high bond strength. Color: EPIKURE Curing Agent 3115-U-80 Epoxy Curing Agent with a Gardner color of 10 is used in clear epoxy casting compounds, where it ensures low discoloration and optimal aesthetic appearance. Purity: EPIKURE Curing Agent 3115-U-80 Epoxy Curing Agent with 98% purity is used in electronics potting, where it ensures reliability and electrical insulation consistency. Mix Ratio: EPIKURE Curing Agent 3115-U-80 Epoxy Curing Agent with a mix ratio of 50:100 (by weight) is used in marine coatings, where it enables proper stoichiometry for full mechanical performance. Stability Temperature: EPIKURE Curing Agent 3115-U-80 Epoxy Curing Agent stable up to 60°C is used in pipe lining systems, where it maintains curing properties during elevated temperature application. Flash Point: EPIKURE Curing Agent 3115-U-80 Epoxy Curing Agent with a flash point of 93°C is used in civil engineering joint sealants, where it promotes safer handling and compliance with safety regulations. Pot Life: EPIKURE Curing Agent 3115-U-80 Epoxy Curing Agent with a pot life of 40 minutes at 25°C is used in construction grouts, where it provides sufficient working time for large-scale installations. Water Resistance: EPIKURE Curing Agent 3115-U-80 Epoxy Curing Agent with enhanced water resistance is used in structural concrete repair, where it improves long-term durability in moist environments. Thermal Resistance: EPIKURE Curing Agent 3115-U-80 Epoxy Curing Agent with a thermal resistance up to 120°C is used in automotive composite parts, where it ensures dimensional stability under thermal stress. |
Competitive EPIKURE Curing Agent 3115-U-80 Epoxy Curing Agent prices that fit your budget—flexible terms and customized quotes for every order.
For samples, pricing, or more information, please contact us at +8615651039172 or mail to sales9@bouling-chem.com.
We will respond to you as soon as possible.
Tel: +8615651039172
Email: sales9@bouling-chem.com
Flexible payment, competitive price, premium service - Inquire now!
